Quick Pitch Kit

Quick Pitch® is a revolutionary new product that will completely change the way in which a mortar bed is installed.

In order to install a proper shower floor, the base of the shower has to have a proper slope for drainage. With Quick Pitch® this is easily accomplishable.

Quick Pitch® is a shower floor drainage kit that creates a perfect shower floor-base slope to drain the water from the shower floor.

Quick Pitch® can be used in Shower Stalls, Tile Tubs, Fountains or any installation that a proper slope is required (1/4" per foot).

Quick Pitch® will save you time and money thus eliminating costly call backs due to improper slope to the drain.


FOR MORE comprehensive information: www.markeindustries.com

SIZING

Quick Pitch® Standard Kit
For standard 36” x 60” shower areas with a centered drain, or custom shower areas where the drain is within 36” of each wall. Included in each package is one each Center Ring and 6 each Standard Float Sticks (1” to 1 3/4” taper x 36” long) that attach in any of the 24 slots on the Center Ring.

Quick Pitch® Standard Float Sticks
These are the Standard Float Sticks (1” to 1 3/4” taper x 36” long) that are supplied in the No. QPK-101 Quick Pitch® Standard Kit, and they attach directly to the Center Ring. These ʻextrasʼ are generally needed for use in custom shower areas with either curved, or more than four walls. Sold 9 each per package.

Quick Pitch® Extended Float Sticks
These Extended Float Sticks (1 3/4” to 2 1/2” taper x 36” long) attach to the 1 3/4” end of the Standard Float Sticks. They are for use in shower areas where the walls are more than 36” (but less than 72”) from the floor drain. Sold 8 each per package.